Mod Your Xbox 360!

[Kyle2100 2.2k Donor]

Noob friendly tutorial using J-runner

This PDF found here

Hardware requirements found here

Software requirements 

1. Jrunner

Xbox requirements 
1. A xbox Phat of any motherboard type or a Slim trinity

2. A console at or bellow 2.0.14699.0 kernel 

Step 1
Dumping the Nand 

Before doing anything make sure your xbox is updated to the 2.0.14699.0 dashboard

install your Nand-x using the diagrams shown

PHAT


SLIM



Once you have installed your nand-x plug your console into you power supply but do not turn the console on then plug the nand-x cable you soldered to the mother board into the nand-x and the usb cable into the computer then open up Jrunner.
once open click this box



After clicking this box a window will pop up with a list of different console types. Select what type of motherboard your console has after doing so click the read Nand box shown here 
Jrunner will then proceed to dump your nand twice and then compare the nands to make sure they match if they do continue on. if the nands dont match check your soldering and try again if you cant get your nands to match after MULTIPLE times of trying then ask for help in the support forums 

1.1 For Phats only checking the CB

to do this on the right had side of the Jrunner app you will see a bunch of box's with writing in look at the box labeled "2BL[CB]" shown here 

 
if your CB version dose not match the ones listed than do not continue 

Falcon and Opus 5771

Zephyr 4578 or 4579

Jasper 6750 or 6751

if your CB is correct than continue if not the you console is not exploitable at this stage and you will have to wait till RGH 2.0!


2. Programing your Xecuter coolrunner 

to do this plug the coolrunner into the nand x like so

then click the Flash Coolrunner box shown here 


it will then program your coolrunner

once finished unplug your coolrunner 

Step 3 installing your Coolrunner 

To do so follow one of these diagrams depending on your mother board type








Step 4 creating and writingn your .ECC (xell) 
to do this simply click the Create ECC box shown here


it will then create your .ecc file 

once done with you nand-x hooked you press the write ECC box shown here 


it will then write the .ecc file you created to your console

Step 5 Getting you cpu key

unplug you nand-x from the console and plug you xbox into the tv and turn it on make sure you have a camera handy to take a photo of you cpu key at this 
point 



open notepad and type out fuse set 3 and then add fuse set 5 to the end of it and open a notepad and type it in then save it as cpukey.txt
(Example: if my fuse set 3 is 012356789ABCDEF and my fuse set 5 is ABCDEF012356789 than my cpu key would be 012356789ABCDEFABCDEF012356789)

step 6 Building and writing you ggbuild image 

to do this put your cpu key in the cpu key box shown here


click dash version box shown here


a tab will appear with a list of dash versions i suggest picking 14719 as it is the newest then click create image Jrunner will then make your image when has finished click the write image box i will then write ggbuild once it has finished unplug your nand-x from the console then remove the power cable for 30 sec or more then plug back in and boot

Step 7 

Have fun with your new RGH xbox 360 


Thanks to ubergeek and xecuter for some of the pictures i used in this tutorial

Updated April 10, 2018 by Zimon

[bR34Kr 19k]

Good job man!  Very nice TuT

 

BTW We don't see images.

[Kyle2100 2.2k Donor]

16 minutes ago, ggAyMe said:

Good job man!  Very nice TuT

 

BTW We don't see images.

Will fix that 

[Guest]

@Kyle2100

Please edit your topic and add the requirements to your topic, don't refer to another forum.

This is not the first time you refer to another forum.

 

I also changed your club description to edit out the "selling" part of it, no selling is allowed on iOSGods.com.

Please read the forum rules found here.

[Kyle2100 2.2k Donor]

1 minute ago, Zimon said:

@Kyle2100

Please edit your topic and add the requirements to your topic, don't refer to another forum.

This is not the first time you refer to another forum.

 

I also changed your club description to edit out the "selling" part of it, no selling is allowed on iOSGods.com.

Please read the forum rules found here.

Thank you

[Kyle2100 2.2k Donor]

This topic was moved from Topics to Xbox Modding.

[Dallsolso 9]

oh cool, if only I had my power cable for my old 360