i0s_tweak3r

@INTOXIC Got find my iphone turned off. Now try to follow this tutorial, make sure also ur touch ID/passcode are turned off. @InoXtiC If you can't get it working, try the tricks from this tutorial. It once took me 30 tries to jailbreak and the things in here eventually worked. http://www.redmondpie.com/fix-re-jailbreak-with-pangu-pp-app-not-working-after-reboot-heres-how/ Also I don't know why this can make a difference, but I read it somewhere and it seemed to help. Try having ur phone plugged in to power when u hit the circle to jailbreak, then unplug it when you lock the phone. Also try the reverse, have it unplugged and plug it in when you lock phone.

Try waiting a couple seconds after hitting circle before locking. Occasionally it takes a few tries. Also make sure find my iphone and touch id/ passcode are turned off. Also remember to uncheck the little box on the bottom, like the tutorial suggests. Edited to add: You'll know it worked when you see an error about low memory right before it resprings.

The hex address from iGG isn't going to give you the correct offset, you need to use lldb, along with iGG. Also, if you can't hack things with iGG the game may not be sub_x, in which case you need to just crack the binary and import it into IDA. I'd read some tutorials on IDA because ultimately that's where you're going to end up either way.

@InoXtiC You should really continue your thread here rather then PMing. Not only is there a better chance that you'll get the help u need because more people see it and respond, but also if someone else encounters the same problem it's not fair to them to have the solution in a private message. I feel partly responsible for responding to ur messages, but to summarize what's been done: The cydia impactor error was because the Nvwastone app was corrupted or not fully downloaded. After I suggested downloading again ,Inoxtic was able to install official pangu app. Again it never resprung, it just said jailbreak succeeded and is waiting to install Cydia. I suspect that Find My iPhone or Touch ID/Password were not turned off, and that was the cause for the error. (But Inoxtic thinks they were off) Anyways I had Inoxtic try the Chinese version of Pangu, and it was so close it finally resprung, but didn't give the low memory warning or install Cydia. I recommended to try to power off the phone and boot it holding down power and volume up button, then releasing power button but holding volume up button until arriving at lockscreen. Then trying again to jailbreak. Inoxtic decided to start over from scratch after having no luck. I believe reinstalled the Nvwastone 1.1 app from http://en.pangu.io , but now can't turn off "Find My iPhone" due to a verification error, "could not connect to iCloud." The device was showing 4G instead of LTE, and a friend of mine got the same error when cellular service was poor. I suggested trying again, and if it still doesn't work to connect to wifi and try to turn off "Find My iPhone." Inoxtic is at a camp at the moment though and doesn't have wifi available. The device in question is indeed still on iOS 9.3.3, and was reset to factory settings before creating this thread/ having difficulty jailbreaking.

I successfully used the site in this tutorial on a friend's phone. http://www.redmondpie.com/how-to-jailbreak-ios-9.3.3-using-safari-no-computer-required/ Airplane mode didn't work tho had to change date to May 15,2015 after download started, then change it back to normal to trust the profile, then change it to May 15 2015 to open and use the app. Worked like a charm on a 5s running 9.3.3

Oops lol posted in wrong thread.

I might. Have to check. Does it have to be that version in particular? If any "recent" version works for you I'll crack it and upload an .ipa file for ya. Edit: I have version 2.3 if u want it.

Try hitting the back button on your browser, or looking for an extra window that opened with the file. I remember getting a blank page when I removed the ASLR with that site, and eventually I found the file. Just a heads up tho removing the ASLR with your iOS version / device is just going to make the game crash when you install it. Do a search for removing ASLR for iOS 8.4 and above. You basically have to manually calculate the differences with the offsets using a hex converter. The binary tool for ASLR removal (at least from what I understand) only works on older iOS versions and devices.

So I can start spamming my mixcloud Dj mixes? Sweet! Seriously tho def a neat feature. I noticed it a couple weeks ago. I like that it works on mobile.

No problem. If ur issue is solved, if you can just put a check mark on the post that best answered your question, so other people can skip this thread when looking to help out with support.

Be careful if you restore from backup you'll probably lose jailbreak and be updated to latest iOS, which there is no jailbreak for. There are tweaks to back up apps and tweaks, and restore, like App Admin, Open Backup, and others. Also you could try to backup on computer with iBackupBot and/or iFunbox if you want to avoid iTunes. Edited to add: If you are just looking to do a backup before jailbreaking, you can use one of the above computer tools, and you can find the jailbreak at: http://en.pangu.io If you've jailbroke the device before you can go to http://jbme.qwertyoruiop.com to rejailbreak.

Are you currently jailbroken? (Sorry I'm on mobile and can't see.) If so, have you recently installed Extender? I had a similar problem where I couldn't install app store apps and it was right after I installed Extender. If that's the case, uninstall Extender, Appsync Unified and Appcake and try again. If everything is good, make sure you install the updated Appsync Unified (it'll say iOS 10 compatible), Appcake from official repo cydia.iphonecake.com and make sure Extender is from julio.xarold.com, there's Extendilife and Extender there I believe, install them both if you don't have a paid developer account. Also there's a thread on here if you search for how to install and use Extender to self sign apps. (I'm assuming ur iOS 10 since u were trying to install Yalu)

Are you still on iOS 9.3.3? Are you using the Nvwastone.ipa app from the official pangu link I listed above? Also if jailbreak succeeded but no Cydia was installed you'll have remove jailbreak before trying again, so reboot phone to return to normal state, then use the Pangu app, assuming you're still on 9.3.3.

Sounds like you need a fresh jailbreak from the official pangu app if there is no Cydia icon. Reboot ur device so u lose jailbreak, then install the Nvwastone app. Download it from http://en.pangu.io then use impactor to sideload it. If you get an error make sure u don't have other apps already sideloaded with the same apple id. Also read the earlier post for the other couple most common reasons ppl get impactor errors. If impactor still doesn't work be sure to post what error you are getting from impactor. Also, you probably already know but make sure find my iphone and passcode/touch id are off when u try to jailbreak. You are still on iOS 9.3.3 correct?

Sweet. 3/20 = better odds. Thx for the giveaway some of us care.

That's the problem. There's no jailbreak for 10.3.2 at the moment. The Yalu tool only works for 10-10.2, and Pangu's new tool hasn't been released, if it will be at all. Any tool claiming to jailbreak 10.3.2 at this time is a fake. Follow updates on Redddit /r/jailbreak to find out when real jailbreak is released, or look for chatter on here about it. Edit: In the future make your own support topic.

Thank you. I downloaded lldb and debugserver last night from Dida's post. The debugserver is the only part that goes on your device, right? The lldb you just install on your computer? I was a little confused with the instructions to "rub cmd-lldb". Anyways, I'm going to try to get lldb working tonight, now that I know gdb won't work. Thanks for solving this support topic.

Mark the topic as solved when you have a chance, whatever post fixed ur issue.

Is it possible to use? I read somewhere after much time trying to figure out what's wrong, that it doesn't support arm64. Anyways, after SSHing into device, logging in as root, and starting gdb, I get an error about an unrecognized wasabi 0, or something like that, yet it lets me attach to process ID found in iGG. When I do though I just get a huge page full of errors like in this thread: If I try to set a watch point it has a huge number of those similar errors, along with the wasabi-0 error. I'm using gdb from the radare repo, permissions set to root and wheel. Using a cracked binary from a game I know is sub_x, easily hackable with iGG, and I deleted the original app and installed cracked version in case that made a difference. Before installing the debugger and trying to get it to work I spent a good amount of time reading tutorials on how to use gdb, so I'd really like to be able to get it working. Any helpful pointers to get it working would be appreciated.

Makes sense. I forget how many small screens still get used.

Any plans to add that info right under Device / OS info on the user profiles when viewing from a mobile browser? I love all the great things that are being added, just wish more were mobile-friendly.

Ok great! Thx for reporting back.

Try looking at the tutorial links...Are u jailbroken? I know it works because I tested on both iOS 9.3.3 and 8.4, 2 separate devices, and neither were signed into game center. If you are jailbroken, use apps manager to wipe ur data (back up first), then delete app and reinstall along with files before opening the app. Make sure also you are not signed in with Facebook or anything like that as well, because that has a separate saved game on their server. It definitely works as a new user/ guest.

What's the CPP error number? When you open Impactor click "Check for updates" and make sure you have the most recent version installed. The previous one stopped working and it was updated. Also ur problem could be you have 2 step verification enabled on ur AppleID. If that's the case you have to generate an app specific passcode and enter that instead of ur normal one when side loading the Yalu app.

What error are you getting from impactor? Most are simple things that can be fixed, possibly even just by updating it. Click the "Check for updates" after you open impactor. If it's not the most recent version that could be ur error. Using the official app from pangu is the best way to do it if it's ur first time jailbreaking the device. If impactor is updated, your error could be because you have 2 step verification tied to ur apple account, meaning you need to go to Apple website and generate an app specific password for Pangu app/ anything you want to side load with impactor. It's a long, like 12 digit combination of numbers and hyphens. If that's the problem after you create app specific password, enter ur Apple ID in impactor, and that password not ur normal one when adding Pangu app. (The Nvwastone.ipa) Edited to add: Is this the first time jailbreaking the device? If not you should be able to just go to http://jbme.qwertyoruiop.com and rejailbreak from there.