Tutorial Dual boot Kali+Win7 + post install

[Sterling0x1 3.7k iPhone Xs Max 13.5]

Requirements:
- Latest Kali image ( https://www.kali.org/downloads/ )
- USB drive 8GB+
- Motivation (A lot)
- MiniTool Partition Wizard Professional Edition (or any alternative)
- Disk Imager

Right, so you want dual boot Kali and play MR Robot eh?

First Download the latest Kali image (https://www.kali.org/downloads/). Run Disk imager and make a bootable disk.

When done, you`ll need to make a partition where you install it. Open up the partition wizard and cut as much as you want off an existing partition.
Make sure to set the partition as PRIMARY otherwise GRUB (bootloader) wont install, also set filesystem as EXT4. Press APPLY changes and sit tight until the process is done.
This is very important in order to get kali work,  if you make a mistake here, it wont install.

Well, if we`re all done with making partition, time to install Kali on our PC. Plug in the USB (change boot settings in BIOS if necessary), and select install or install graphical from Kali boot menu.

The Installation process is pretty straight forward. 

You`ll need to set up a root password (don't leave it blank), select language, connect to wifi and stuff, really straight forward. 
However when you arrive to the partitioning part, pay attention. 

Select the Free partiton we already created.
Select create new partiton, Use as much space as you need. 
Make sure its PRIMARY.
Use as: EXT4 filesystem
Mount point: /
Bootable flag: yes

Apply changes and proceed with the install. 

From here on it's straight forward, if "swap" message pops up, you can select "no" and proceed anyway. 

When the process finished you'll reboot and get into the bootloader, you'll see both Kali and Win7, select Kali and done. Log in with root and root pw and good to go.

POST INSTALL:

After a installing Kali you wanna do the following in order to get your packages up to date.

Open up file manager and go to you root folder. Go into [ic]etc/apt[/ic]and open up sources.list. Delete whatever is inside it and add the following:

deb http://http.kali.org/kali kali-rolling main contrib non-free
deb-src http://http.kali.org/kali kali-rolling main contrib non-free
deb cdrom:[Debian GNU/Linux 2017.1 _Kali-rolling_ - Official Snapshot amd64 LIVE/INSTALL Binary 20170514-03:49]/ kali-rolling contrib main non-free
deb cdrom:[Debian GNU/Linux 2017.1 _Kali-rolling_ - Official Snapshot amd64 LIVE/INSTALL Binary 20170514-03:49]/ kali-rolling contrib main non-free

When done open up terminal and run the following commands.

sudo apt-get update
sudo apt-get upgrade
sudo apt-get dist-upgrade 

Reboot and you're all up to date.