Requirements :
- Gun Raiders
- windows 10
- python-3.10.0
- mitmproxy
[Hidden Content]
Make sure you have Gun Raiders iOS fully installed before following the step by step below.
Before running the script, make sure to:
1. Install Both Required Programs
Download and install the two necessary programs listed above.
2. Download the hybrid
After installing both programs, download the hybrid and unzip it.
3. Run the Script
Double-click the `run.bat` file to launch the Python script.
---
Step 1: Find Your IPv4 Address
1. Open Command Prompt (CMD) on your computer.
2. Type the following and press Enter:
ipconfig
3. Locate and copy your IPv4 Address (e.g., 192.168.1.123).
---
Step 2: Configure Proxy on iPhone
1. On your iPhone, go to Settings > Wi-Fi.
2. Tap the blue "i" icon next to your connected network.
3. Scroll down and tap Configure Proxy.
4. Set it to Manual, then enter:
- Server: your IPv4 address from CMD
- Port: 8080
5. Tap Save in the top-right corner.
---
Step 3: Download the Certificate
1. Open Safari on your iPhone.
2. Visit: mitm.it
3. Select iOS.
4. Tap “Get mitmproxy-ca-cert.pem”.
5. When prompted, tap Allow to download the certificate.
---
Step 4: Install and Trust the Certificate
1. Go to Settings > General > VPN & Device Management.
2. Tap mitmproxy and follow the steps to install it.
3. Go to Settings > General > About.
4. Scroll down and tap Certificate Trust Settings.
5. Enable trust for the mitmproxy certificate.
---
Now that everything is set up:
- Open Gun Raiders on your iPhone.
WATCH VIDEO
Important: If you stop running the Python script, you’ll lose access to the added items.