DIY Hack Gun Raiders Hybrid iOS [ UNLOCK ALL ITEMS ] + [ AUTO UPDATING ]

[iosdevice 7.3k iPhone 12 Pro Max 18.0 Donor]

Requirements :
- Gun Raiders
- windows 10
- python-3.10.0
- mitmproxy

Hidden Content

React or reply to this topic to see the hidden content & download link. 👀

Make sure you have Gun Raiders iOS fully installed before following the step by step below.

Before running the script, make sure to:

1. Install Both Required Programs  
   Download and install the two necessary programs listed above.

2. Download the hybrid
   After installing both programs, download the hybrid and unzip it.

3. Run the Script  
   Double-click the `run.bat` file to launch the Python script.

---

Step 1: Find Your IPv4 Address

1. Open Command Prompt (CMD) on your computer.  
2. Type the following and press Enter:
   ipconfig
3. Locate and copy your IPv4 Address (e.g., 192.168.1.123).

---

Step 2: Configure Proxy on iPhone

1. On your iPhone, go to Settings > Wi-Fi.  
2. Tap the blue "i" icon next to your connected network.  
3. Scroll down and tap Configure Proxy.  
4. Set it to Manual, then enter:  
   - Server: your IPv4 address from CMD  
   - Port: 8080  
5. Tap Save in the top-right corner.

---

Step 3: Download the Certificate

1. Open Safari on your iPhone.  
2. Visit: mitm.it  
3. Select iOS.  
4. Tap “Get mitmproxy-ca-cert.pem”.  
5. When prompted, tap Allow to download the certificate.

---

Step 4: Install and Trust the Certificate

1. Go to Settings > General > VPN & Device Management.  
2. Tap mitmproxy and follow the steps to install it.  
3. Go to Settings > General > About.  
4. Scroll down and tap Certificate Trust Settings.  
5. Enable trust for the mitmproxy certificate.

---

Now that everything is set up:

- Open Gun Raiders on your iPhone.  

WATCH VIDEO

Important: If you stop running the Python script, you’ll lose access to the added items.

Updated May 24 by iosdevice