Kyle2100

Hardware requirements:
Wii
Large usb stick or usb external usb hard drive.
Computer with usb ports

Software requirements:
The Homebrew channel
WBFS manager 3.0 or later
rev 10 installer with usb loader
Wii game iso
Step 1: Install WBFS Manager.

Download these files:

Uncompress the WBFS Manager rar file with 7-zip.
Click on the WBFS Manager setup icon.
A new screen will pop up and tell you that the program will install WBFS Manager on your computer. Click next.
It will then ask you to save to files in a folder. Either choose a folder or leave it on the default folder.
Click next. It will now tell you that it is ready to install to your hard drive. Click Next to begin the installation process. When it is done installing press "Close."

TipQuestionComment

This next step explains how to load a Wii ISO to you usb device.

The first step is to get a Wii iso backup file. (I can't tell you where.)

Plug in your usb device in your computer . Click on the WBFS Manager 2.5 icon on your desktop. A new scree n will open. Use the drop-down tab under "Edit" in the upper left corner to choose your usb device drive letter. 

(WARNING: Be very careful not to format your hard drive! Make sure you're drive number is right!)

Now click format to delete the contents on your USB device and change the format to WBFS. 

(Note: You will not be able to use the USB drive only to store Wii isos because the computer operating system doesn't recognize the WBFS format).

After you're done formatting click the "Load button to load the contents of your USB device. It's empty.

Click the "Browse" button in the lower right corner to open a new window, locate your Wii ISO, click it, and click "Open" in the lower right corner.
It will take a few seconds to load. You should see it in the right half of the WBFS Manager window. Hover your mouse over it to see it's game cover. 
Now click "Add to Device" to compress your Wii ISO and add it to your usb device.
It will take about 5 minutes to upload the file to a usb device.
After it's done, either close the program and take your usb device out of your computer and go to the next step, or add more games to your usb device.

TipQuestionComment

This next step will explain how to usb loader on your Wii.

Before you can install usb loader to your Wii you first need the files in your SD card. 

Unrar the usb hack rar file with Winrar or 7-Zip and copy the contents of the "Copy contents to root" folder to the root of your SD card. Pretty self explanatory. If you get a window asking you to merge folders click yes. Now comes the tricky part.

(Optional: You can also download the covers for the games.
The reason I say it's optional is because it contains over 1300 game covers and will occupy 100 MB in your SD card. But it's convenient to have so you don't have to squint to read the game text on the tv. Just download it, uncompress the Covers zip file with 7-ZIP and drag the covers folder to the usb-loader folder in the root on your SD card.. You will get a prompt to merge folders and click yes )

Remove any Gamecube memory cars and Gamecube controllers from the Wii.
Insert the SD card into your Wii, turn the Wii on and go to the Homebrew channel.

Click on "cIOS36rev10" and click load. The screen will go black for a second and you will then be in the cIOS36rev10 installer. Use the directional arrows to choose WAD installation and click A. After a few minutes it will have completed the installation of cIOS rev 10. 
Now, restart your wii, go back to the Homebrew channel, and go to Wad Manager 1.3 and click load.
Choose the SD card, press A, then choose the WAD "USBLoadermodBrisma.wad" and press the + button on your Wii remote. After a few moments it will have completed installing the USB channel.
Press "HOME" on your Wii remote to restart your Wii.

 

This step will explain how to install the usb loader channel to your Wii menu.

First go to the homebrew channel then load the WAD manager.

The screen will go green for a second and you will see a disclaimer on the screen. Press "A" on your Wii remote to continue.
Use your left and right directional arrows on your Wii remote to select SD card.
Now you will see a USBLoadermodBrisma WAD file.
Use the down key to select it and press "+" on your Wii remote to install it.
After it finishes installing, press your HOME button te restart the Wii.
On your Wii menu there should be a new channel called usb loader channel.

Step 5: Using the USB Loader Channel and Playing Your Games.

In this next step I will explain how to use your new Channel, and how you can play your games on it. 

First, plug your usb device into your Wii usb slot and start the USB loader channel.

Here are the controls for the USB loader channel.

If you have any problems just ask it in the comments below.

Letterbomb is the latest Wii exploit and is currently the only to way to hack a Wii on System Menu 4.3 without using a game.  It's likely that it will not be ported to any lower System Menus since Bannerbomb is available for those.

Letterbomb uses a yet-to-be-specified exploit in the Wii Messageboard.

 

 

Only for:

System Menu 4.3 (E, U, K, J)

Required:

• An SD card (Best results are with non-SDHC cards, SDHC will only work on 4.0 or above) or USB device formatted to FAT(32).
• Your Wii's WiFi MAC Address (instructions in obtaining to follow...)

Links:

• Letterbomb Exploit: http://please.hackmii.com/

Guide:

 

Wii ----------------------

(If you already know how to get your Wii's WiFi MAC Address, skip to step 2)

1.  Go to your Wii's Settings menu.  Select "Internet" on page 2.  Select "Console Information".  Record your Wii's MAC Address for use in the next step.

 

 

Computer ----------------------

 

2.  Follow the link provided above to the HackMii download page.

 

3.  Make sure "Bundle the HackMii Installer for Me" is checked.  Select your System Menu region, enter in your Wii's WiFi MAC Address, fill in the captcha, and "cut either wire".

 

4.  Extract the contents of the freshly downloaded .zip file onto the root of your SD card.

 

 

Wii ----------------------

 

5.  Insert the SD card into your Wii.

 

6.  Go to your Messageboard (button on bottom-right of Menu) and navigate to "Yesterday" (depending on your timezone, the exploit could show up under "Today").

 

7.  Click on the pink envelope with the bomb to run the HackMii installer.

 

---

 

UPDATE: PS3Xploit 4.84 HFW Flash Writer + IDPS/Flash Dumpers Updated v2.0.1 - (Now install CFW from 4.84) See HERE for details

---

Huge News as the PS3 exploit ladder has taken a step up into 4.84 rung, with a new approach to bring back PS3Xploit functionality on 4.84.With a Hybrid Firmware (NOT A CFW) that can be installed on ANY MODEL PS3 over any Official Firmware (OFW) version. .The only thing this modified firmware essentially does is bring back the patched webkit from OFW 4.82 that was an entry point for PS3Xploit, if you recall when 4.84 was released developers @bguerville and@esc0rtd3w stated the exploit was not actually patched but rather only the webkit entry used was removed in 4.83+ which rendered the actual exploit unreachable (not patched and could be restored). Now the webkit is back for 4.84 OFW thanks to this new clever magic that has allowed OFW user's to use and install this slightly modified Firmware.

So, what does all this mean? Now it will be just like it was back in 4.82 before PS3Xploit was "patched"(some ps3xploit tools need updated still) you will be able to install a CFW (on a CFW compatible model) and for those unfortunate user's that does not have a CFW Compatible model (i.e. SuperSlim/late slims) you have will have access to the HAN exploit . So for new user's or ones that updated, here is your second chances thanks to the efforts of the PS3Xploit Team and to @Joonie (waved magic wand on files), @habib(for valuable input on this project) and @esc0rtd3w (work in porting ps3xploit tools to 4.84) 

(Note: NOT ALL PS3Xploit tools are updated currently, Ps3Xploit team is currently working on updating those tools. Stay tuned.)

•  
  4.84.2 HFW (Hybrid Firmware) 
  Restores PS3Xploit Flasher/Tools & PS3Xploit HAN for 4.84 OFW user's
   
  Today, we proudly present the very first modified OFW that can be installed on all PS3 models. (NOTE: THIS IS NOT A FULL BLOWN CFW, HOWEVER IT Allows you to run the patched webkit exploit that's ported to 4.84)
  
  Yes, you didn't hear wrong, it can be installed over 
  • ALL OFW versions on ALL PS3 models
    • ex) OFW 4.83, 4.84 , CECH-3XXX, CECH-4XXX and etc..
  
  We wanted this to be called "HHHFW" since it was Hybrid, Hack-able, HAN ready also inspired by @habib but let's call it HFW since this is Hybrid FW (Well you can call this MFW).
  
  The idea was reminded by some guy who didn't want to be annoying but actually ended up being helpful: @ psx-place.com
  
  Habib had this idea long time ago but the previous attempt was not successful due to lack of interest and preparation.
  
  As you all know, I recently started messing with my PS3 again and this idea was brought back.
  
  So then I went ahead and tried his magical idea.... after a few hours later... Boom!!, now we have HFW that works on all PS3 models (including 3K and 4K) that allows the previously patched exploit by using old webkit from 4.50 that's been used until 4.83. This method is rather hacky than technical, so I would like to leave this method under the radar for now until it gets patched out (this can easily be patched).
  
  What can you do with this HFW 4.84.1/2?
  1. You can use PSN since the FW is the latest.
  2. You can downgrade/Install CFW on your PS3 if your model is downgrade-able/hack-able (excluding CECH-3K and 4K)
  (The same capability as what you had for 4.82 OFW)
  3. You can use HAN and all the tools that worked up to 4.82 with this FW.
  https://t.co/Qc19fWnmfs < here's the latest ps3xploit that works on this FW.
  4. You can always go back to the real OFW 4.84 if you wish.
   
   
  Special thanks @habib @bguerville@esc0rtd3w @Doge_Rules @DeViL303@littlebalup
   

  ---

  UPDATE 3-22-2019 - 4.84.2 Released

  ---

  HFW 4.84.2_PS3UPDAT.PUP
  • Bugfix : Fixed the installation issue with regions that use following languages 
    English (UK), Turkish (Turkey), and Portugal (Brazil) ,  Thanks to @citra mulia to report the bug 
  • 

Download link (MEGA) : HFW_4.84.2_PS3UPDAT.PUP
MD5 :4247362b54fadd2e4d7c09007f720803

UPDATE (3-24-19): PS3Xploit 4.84 HFW Flash Writer + IDPS/Flash Dumpers Updated v2.0.1 - (Now install CFW from 4.84) See HERE for details

The Spoof in SEN Enabler allows for a lower firmware to connect to PSN, but also note that it could be a potential trigger for a PSN ban so be aware of that when spoofing. For more info about SEN Enabler you can always checkout the official release and support thread located here in the psx-place forums.

 

• Latest Release

• 
  Improvements v6.2.1
  • Added support for webMAN in '/dev_flash' paths on startup in Cobra
  • Added support for Cobra 4.81 DEX
  • Spoof to 4.84 (Online works again)
  
   

Download: MEGA || MEDIAFIRE || SENDSPACE || RGHOST || ZIPPYSHARE
Cobra 7.55 SRC GITHUB